Search:
 

Jiffy Steamer

Wednesday, November 21, 2012

How To Clean Your Jiffy Steamer

 
Need directions on cleaning your Jiffy Steamer?
 
The cleaning procedure below is recommended as a regular maintenance measure to help your steamer maintain its maximum steaming performance. This maintenance should be performed on a basis of every 3–6 months depending on your water supply. In most cases, a steamer that is severely clogged will require disassembly to properly clean and prolong the life span of the unit. An authorized repair center or a Jiffy Steamer service technician best performs this disassembly. The directions are below for each Jiffy Steamer Model, using the Jiffy Liquid Cleaner.


CLEANING YOUR ESTEAM
Pour 4 ounces of water in the ESTEAM.
Plug in the unit and bring to full steam.
Unplug the unit and allow to cool for 2 minutes, pour out all water.
 Pour in 5 ounces (1/2 bottle) of Jiffy® Steamer Liquid Cleaner, leave the cleaner in the unit for 2 hours. DO NOT STEAM THE UNIT WITH THE LIQUID CLEANER.
Pour out Liquid Cleaner and flush with fresh water and rinse 2-3 times.
 
 
 
CLEANING INSTRUCTIONS FOR MODELS J-1, J-2, J-200 & J-2000 JIFFY® STEAMERS
Unplug your steamer from the wall outlet. Remove hose attachment at the
brass coupling using a wrench and remove water bottle from unit. Pour out any
remaining water.
If the hose attachment is blocked by sediment build-up, flush your hose
attachment by using a garden water hose.
Pour the entire bottle of cleaning solution into the water cup of your steamer.
This is the location on the steamer base where you normally place the water container.
Allow the cleaning solution to remain in the unit for 2-3 hours.
DO NOT STEAM THE SOLUTION IN THE UNIT AS DAMAGE MAY OCCUR.
Pour the cleaning solution out of the steamer. Do this by tilting the steamer
back and forth and pouring the solution out of the water cup area and the steam outlet.
Rinse the unit thoroughly by flushing with fresh water 2-3 times.
 
 

CLEANING INSTRUCTIONS FOR MODELS J-3, J-4, J-4000 JIFFY® STEAMERS
Remove hose attachment from unit at the brass coupling using a wrench.
Pour out any remaining water from your unit..
If the hose attachment is blocked by sediment build-up, flush your hose attachment
by using a garden water hose.
Fill your steamer with 1 gallon of water and add the entire ten (10) ounce bottle of
Jiffy® Steamer Liquid Cleaner. Turn the steamer to PREHEAT and allow water
and solution to warm.
When the red pilot light turns off, indicating the end of the PREHEAT cycle,
turn the switch to OFF and unplug the steamer from the wall outlet. Allow the water
and cleaning solution to remain in the steamer for 2-3 hours.
DO NOT STEAM THE SOLUTION IN THE UNIT AS DAMAGE MAY OCCUR.
Pour the cleaning solution out of the steamer. Do this tipping the steamer over
and pouring the solution out of the brass fitting where your hose normally attaches.
Rinse the unit thoroughly by flushing with fresh water 2 to 3 times.

 

TO ORDER JIFFY LIQUID CLEANER
You may order our cleaner on our website at www.jiffysteamer.com or by calling 800-525-4339.

For any other questions, please contact our Repair Technicians, they will be more than happy to assist you.  Remember, a well maintained Jiffy Steamer can last for years to come.

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home

Made in the USA
As the world's oldest and largest manufacturer of garment steamers and steamer equipment for personal and professional use, Jiffy® Steamer manufactures over 16 fabric steamers and clothes steamer models including the popular Esteam®, with only the finest industrial and professional components available. Jiffy® Steamer customers throughout the world enjoy the ease of use when steaming clothes or fabric in their home or business, simplicity of the process and the omission of the ironing board. Breast Cancer Awarness Line of Jiffy Steamer Products